Valor 922eCN Operations Instructions download pdf (Page 17)

1717

Owners Information

Please read the safety information and notes.

Operating Your Fire

The operating instructions are also on a chained plate inside the control access door.

For your safety this appliance is tted with a ame supervision device which will shut off the gas supply if, for any

reason, the pilot ames go out. This device incorporates a xed probe, which senses the heat from the pilot ame. If

the probe is cool, the device will prevent any gas ow unless the burner control knob is kept pushed in at the PILOT

position. See full lighting instructions on next page.

The Valor Remote Control System

Your Valor Remote Control helps you get the comfort, convenience and aesthetics you want from your Valor Gas

Fireplace.

Setting the Flame

a. Press either of the large “up” or “down” buttons.

b. To raise the ame, press and hold the “up” button until you come to the ame level you want. Let go.

c. To lower the ame, press and hold the down button until you come to the ame you want. Let go.

d. The ame level will remain just as you set it.

When rst turned on, the decorative ames will appear predominantly blue. After approximately 15 minutes, the

ames will turn yellow.

Cleaning

Turn the re off and allow it to cool before attempting any cleaning. Note that the re will retain heat for some time

after it has been turned off.

Metal parts

Clean the metal parts with a slightly damp cloth and then dry. Do not use abrasive cleaners, they could scratch the

surface.

Coals and ceramic rebox walls

Dust etc. can be brushed from the coals using a soft bristle paintbrush after removing the safety guard. We suggest

that you remove the coals in the reverse order to that shown in tting instructions. Make sure that no particles are

brushed into the ceramic burner slots.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23

No comments

Valor 922eCN Operations Instructions Page 17