Valor ITS-702W User Manual

ITS-702W

7Accessing SATTELLITE RADIO Mode To switch to SATELLITE RADIO mode, press the SRC button on the front panel or the (SRC) button on the remote cont

TFT MONITOR OPERATIONOpen/Close TFT Monitor Press the ( ) button on the front panel or on the front zone remote control to open/close the Monito

3. Set Parameters: Press the ( ) buttons on the remote or press the ANGLE button ( ) on the front panel to Adjust the selected feature to

Power On / Off Press the POWER OFF /VOL button to turn the unit on. The buttons on the front of the unit are lightened and “WELCOME” message appe

Adjusting an Audio Feature Press the ( ) buttons on the remote or rotate the POWER OFF/VOL clockwise/counterclockwise to adjust the selecte

SYSTEM SETUP MENUMAIN Menu There are three methods to access the MAIN menu. •Press the SMART DIAL button on the front panel . •Press the MENU butto

Selecting a Feature for Adjustment Press the ( ) buttons on the remote to select a feature to be adjusted. Rotate SMART DIAL clockwise/co

Selecting a Feature for Adjustment Press the direction buttons on the remote control or touch the option directly on the screen to select the fe

Standby 1. Touch the button on the touch-screen to access Standby mode. 2. In the standby mode, the unit stands in low-power state with audio

Tuner TFT displayTUNER (FM/AM) OPERATION 1. Current Source information, touch this area to return to MAIN menu 2. Current Radio Band Indicator 3. C

Preparation Features Tools and Supplies !!!WARNING Disconnecting the BatteryControls and Indicators Button Operation LCD Display / Indica

Auto Tuning Press the button ( ) on remote control or touch the button on the screen to seek the next available channel by increasing t

NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play

1. Touch to Play/Pause 2. Touch to stop 3. Touch to fast reverse 4.Touch to fast forward 5. Touch to repeat playback 6. Touch to repeat from A t

DVD Player Operation Opening/Closing the TFT Video Screen Insert/Eject Disc Reset the Loading Mechanism Accessing DVD Mode Using the Touch-S

Please read all of the instructions below before beginning your installation. We recommend that you have your unit installed by an experienced

Disconnecting the Battery To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to install

Button Operation 1.POWER OFF/VOL Rotary encoder. Press the encoder to turn on the unit, press and hold to turn off. Rotate clockwise/counterc

7.STOP. 8.Seek up 9.Seek down. 10.MODE 11. SMART DIAL Rotary encoder. Press the encoder to access MAIN menu. Rotate clockwise/counter

LCD Display / Indicators 1.Main display area, displays the time, tuning frequency and other text information. 2.Program Type (PTY) indicator 3.Traf

REMOTE CONTROL6Auto Scan Touch the button to automatically scan the available channels of all categories.Manual Scan Touch the PAGE - / PAGE +