Valor 555CFK Operations Instructions download pdf

4000510/02

Note: This kit must be installed or serviced by a qualied installer, service agency or the

gas supplier. These instructions are to be used in conjunction with the main installation

instructions for the above listed models.

WARNING: If the information in these instructions is not followed exactly, a re or

explosion may result causing property damage, personal injury or loss of life.

GROUNDING: This power supply must be installed and grounded in accordance with

local codes, or in the absence of local codes, with the current Canadian Electrical Code

CSA C22.1. or in the USA the National Electrical Code ANSI/NFPA70 latest edition.

1. DESCRIPTION OF SYSTEM

The Models listed above have been designed to accommodate the installation of an air circulation

fan. Operated by a variable speed control and a thermally actuated switch, a fan is designed to

boost the natural convection through the heater; this may be a desirable feature dependent on

the replace location and room layout. The circulating fan may be installed before the heater

2. ELECTRICAL REQUIREMENTS

The fan kit requires a power supply of 120 Volts, 1 phase, 60 Hz. Full load current is less than

1 amp.

This power supply must be installed and grounded in accordance with local codes, or in the

absence of local codes, with the current Canadian Electrical Code CSA C22.1. or in the USA the

National Electrical Code ANSI/NFPA70 latest edition.

#555 CIRCULATING FAN KIT

INSTALLATION and OPERATING INSTRUCTIONS

CSA approved for use only with:

Valor model 530, RetroFire RF24 and Madrona MF28

1 2 3 4 5 6 7 8 9 10

Page 4

Page 6

Page 7

Page 8

Valor 555CFK Operations Instructions